Double-click to start typing
Double-click to start typing





Posted by iihtbargarh on March 5, 2015 at 11:45 AM

BARGARH – 768038
PHONE NO. 06646-211002, FAX NO. 06646-211004

Tender Notification No. IHTG/Pur.(04)/ 1644 dated 03.03.2015

Sealed procurement of following Textile Testing Equipments etc.
Textile Testing Machineries/Equipments:
Sl. No. Items Specifications
01. Sublimation Fastness Tester Temp. range 120 – 2300, Electronic Temp. Controller, Time range 10 to 60 sec.
02. Ballistic Strength Tester --
03. ICI Pilling box tester Size of wooden boxes (Inside) : 225 x 225 x 225 mm
Thickness of cork lining : 3 mm
Speed of rotation of boxes : 60 rpm
Size of test specimen : 125 x 125 mm
Size of rubber tubes : 32 OD x 25.5 ID x 150 mm long
Motor : ¼ H.P Single Phase 220 V AC
Counter : 5 digit preset type stroke counter
04. Pilling standards for visual assessment of pilling As per IS0 / BIS specifications.
05. Manual warp reel of 1.5 yard circumference (Hand Operated) Swift of 1.5yard or 1.0meter Circumference
Traverse (Spread) – 20mm.
06. Conditioning Chamber for textile fabrics Inside size of Chamber - 18” x 18” x 24”
Range of Humidity - 65% to 95%
Range of Temperature - 00 C to 500 C ± 20 C
With a water tank having 1.5 kw heater
07. Knowles Balance --
08. Twist tester, using Twist – Untwist method With digital display.
09. Twist Tester – Hand Operated (For 25-250mm) 5digit revolution counter,
Load on test specimen-0-100gm
10. One inch twist tester for single yarn using straightened fibre method Semi Automatic -4digit display for TPM/TPI values.
Selection Switch for S/2 twist forward/reverse direction of motor.
Speed knob for adjustment of motor speed.
Yarn clamp-2nos.
Yarn tensioning weights provided measuring scale-250mm.
11. C.R. Tester with standard weight Size of test specimen : 40 x 15 mm
(Teasing load ) : 1.0 kg.
Angle measurement : 10 to 1800 x 10
12. Lea Strength Tester Pendulum lever type
13. Crimp Tester Maximum test length : 400 mm
Maximum elongation : 125 mm
Tension load : 3 g. to 20 g.
14. Crockmeter – Motorised With Pre-set Counter-Electronic Model with LCD Display
Finger clip-2pc.
AATCC Crocking Square - 100pcs
Diameter of the Finger : 16 mm for Textiles / 25 mm for
floor covering.
Load on the finger : 900 g
Length of travel of the finger : 100 + 3 mm
Size of the test specimen : 200 x 50 mm
15. Tensile Testing Machine – Digital 5000N/500Kgf with Load Cell for display of Breaking Strength and Elongation.
Lease Count – 1N/0.1Kgf
Speed – 300 & 100mm/min
Grips for Lea and fabric – 100mm
Max. Grip Separation – 1000mm and Min. Grip Separation – 100mm
Load Cell – S Type
Power – 440V
16. Wrap Reel – Motorized of 1.5 yard circumference. With Electronic Brake, Pre set counter & Creel for 10 ends. Swift of 1.5 yard or 1.0 meter circumference.
Traverse (spread) - 20 mm
Speed - 125 – 150 rpm (as per IS 1671 – 1977)
17. Hot air oven Inside chamber : Stainless Steel
Inside size of chamber : 450 x 450 x 450 mm
Range of Temperature : Ambient to 2500 C
18. Flammability Tester for Fabrics Size of Test Specimen : 183 cm x 4 cm
Size of modified test specimen : 40 cm x 4 cm
Distance of upper marker wire from the main clip:28 cm
Distance of lower marker wire from the main clip:155 cm
Distance of lower marker wire from the auxiliary clip:10 cm
Diameter of burner opening : 9.5 mm
Dimensions of the Cabinet : 35 cm x 40 cm x 205 cm
19. Electronic Weighing Maching Capacity : 600, 300gm, 210gm
Least Count : 0.01, 0.001gm
Make : E Kanta
The tender is for quoting lowest rates for the supply, installation imparting necessary training and live demonstration of the equipments.
Sealed Tenders, having clearly superscribed on the top of envelope that “Tender for supply/ installation of items at Indian Institute of Handloom Technology, Bargarh” and the same should reach to the undersigned on or before 03.00 PM of 13th March, 2015 and the Tender shall be opened at 04.00 PM of 13th March, 2015 in presence of a duly constituted committee of the Institute. A firm may depute its representative to witness the opening, if it so desires.
The parties must fulfill/ ensure that the following terms and conditions are compiled with and may be kept in view while submitting the Tender:
(i) The firm should be in a position to supply items mentioned above at a notice of 10 working days as and when requested by this office. Similarly Installation/ Training etc. should be completed within 10 working days of the supply of the items/ software/ service or as per the instruction of the undersigned.
(ii) Authorized representative of the firm should be available on his own direct telephone (office as well as residence) and also on mobile phone.
(iii) No request of escalation of rates would be entertained after approval of the rates, which shall be valid for one year from the date of opening of the tender.
(iv) The Textile Testing Equipments should be of standard and reputed make only.
(v) The suppliers will have to ensure warranty conditions attached with the items and prompt replacement, in respect of the defective Textile Testing Equipments and various other allied items/ consumables etc. on their own cost.
(vi) The bidder should have valid CST/VAT registration with Sales Tax authorities, payment of Service Tax, VAT and any other tax as applicable for the last two years.
(vii) The bidder should have TIN/PAN number issued by the Income Tax Department, Commercial Tax Department.
(viii) Certificate of authorized dealer/distributor/channel partner for items such as Textile Testing Equipments, Desktop/Laptop Computer, Printer, Photo Copier, Scanners, Softwares, Ink/Toner Cartridge etc. should also be enclosed with the Tender. Tender without the certificate shall be summarily rejected.
(ix) Rates should be quoted on comprehensive basis i.e, inclusive of all taxes, VAT local octroi, freight & delivery charges, installation charges, training charges etc. if any. No additional payment, other than the rates quoted will be made in whatsoever condition. No advance payment will be made by this office in any circumstances. The payment will be released only after getting all the certificates from the end user that ‘the items/service has been supplied is of desired quality and as per specifications.’
(x) The suppliers participating in the tender will be required to deposit a bank draft/pay order of Rs. 10,000/- (Refundable) as earnest money, in the name of
Director, Indian Institute of Handloom Technology, Bargarh. Earnest money in any other form shall not be accepted and quotations would be summarily rejected.
(xi) The successful bidder shall have bidder shall have to deposit a bank draft/ pay order of Rs. 25,000/- (Refundable) as the Performance Security which should remain valid for a period of sixty days beyond the date of completion of all contractual obligations of the supplier including warranty obligations. Bid security shall be refunded to the successful bidder on receipt of Performance Security. No interest would be paid to the EMD deposited / held back.
(xii) The Director, Indian Institute of Handloom Technology, Bargarh reserves the right to alter any specification/details/quantity of the item/material/ service at any time, and the tendered shall have to abide by the decision of the authority.
(xiii) The Director, Indian Institute of Handloom Technology, Bargarh reserved the right to accept/reject the any or all the tender(s) without assigning any reason.
(xiv) All question and disputes relating to the meaning of the specifications, mentioned in the Tender document and instructions herein before mentioned and as to the quality of workmanship or requirement of materials/services/softwares etc. for the work or as to any way arising out of or relating to the specifications, estimates, instructions orders or these conditions or otherwise concerning the works, or the execution or failure to execute the same whether arising during the progress of the work or after the completion of the person appointed by The Director, Indian Institute of Handloom Technology, Bargarh.
(xv) The tenderer shall not question the nomination of the arbitration on the ground that the Competent Authority has nominated the said arbitrator.
(xvi) The area of jurisdiction will be Bargarh. The legal cost will have to be borne by the tenderer.
(xvii) The above particulars are also available on the website of Office of the Development Commissioner for Handlooms i.e.

(Surendra Kumar)
Director (Institute)
Copy to:
1) Notice Board, IIHT, Bargarh.
2) IIHT Bargarh’s website (
3) The website of DC handlooms (



























Categories: None

Post a Comment


Oops, you forgot something.


The words you entered did not match the given text. Please try again.

Already a member? Sign In


Reply Chloee
7:32 PM on February 6, 2018 
Scorch tester is used to determined the high-temperature resistance of fabric, which is widely used to different areas.
Reply Dephne
7:34 PM on February 6, 2018 
I think TESTEX is a considerable choice.
Reply Pitt
10:26 PM on December 20, 2018 
Heating plate temperature and test time are adjustable, fitted with microprocessor temperature controller and the top plate with precisely controlled weight. It's very useful for testing the fabrics Ironing color fastness and sublimation colorfastness. For more information, see that